View 3N250_181300.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

KBP005M THRU KBP10M 3N246 THRU 3N252
GLASS PASSIVATED SINGLE-PHASE RECTIFIER BRIDGE
Reverse Voltage - 50 to 1000 Volts
Case Style KBPM
0.600 (15.24) 0.125 x 45o (3.2) 0.560 (14.22)
Forward Current - 1.5 Amperes
FEATURES
0.460 (11.68) 0.420 (10.67)
0.500 (12.70) 0.460 (11.68)
60 (15.2) MIN. 0.060 (1.52) 0.160 (4.1) 0.140 (3.6)
0.50 (12.7) MIN.
Plastic package has Underwriters Laboratory Flammability Classification 94V-0 This series is UL listed under Recognized Component Index, file number E54214 Glass passivated chip junctions High surge current capability Ideal for printed circuit board High temperature soldering guaranteed: 260C/10 seconds at 5 lbs. (2.3kg) tension
0.034 (8.6) 0.028 (7.6) DIA.
MECHANICAL DATA
0.105 (2.67) 0.085 (2.16)
0.200 (5.08) 0.180 (4.57)
Polarity shown on front side of case: positive lead by beveled corner
Case: Molded plastic body over passivated junctions Terminals: Plated lead solderable per MIL-STD-750, Method 2026 Polarity: Polarity symbols marked on case Mounting position: Any Weight: 0.06 ounce, 1.7 grams
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25C ambient temperature unless otherwise specified.
KBP KBP 005M 01M SYMBOLS 3N246 3N247
KBP 02M 3N248
KBP 04M 3N249
KBP 06M 3N250
KBP 08M 3N251
KBP 10M 3N252
UNITS
* Maximum repetitive peak reverse voltage * Maximum RMS voltage * Maximum DC blocking voltage Maximum average forward output rectified current at TA=40C * Peak forward surge current single half sine-wave superimposed on rated load (JEDEC Method) Rating for fusing (t < 8.3ms) * Maximum instantaneous forward voltage drop * Maximum DC reverse current at rated DC blocking voltage per leg Typical junction capacitance per leg (NOTE 1) Typical thermal resistance per leg (NOTE 2) * Operating junction and storage temperature range at 1.0A per leg 1.57A per leg TA=25C TA=125C TJ=150C
VRRM VRMS VDC I(AV) IFSM I2t VF IR CJ RJA RJL TJ, TSTG
50 35 50
100 70 100
200 140 200
400 280 400 1.5 50.0 30.0 10.0 1.0 1.3 5.0 500.0 15.0 40.0 13.0
600 420 600
800 560 800
1000 700 1000
Volts Volts Volts Amps Amps A2sec Volts A pF C/W C
-55 to +150
NOTES: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with, 0.47 x 0.47" (12 x12mm) copper pads * JEDEC registered values
4/98
RATINGS AND CHARACTERISTICS CURVES KBP005M THRU KBP10M / 3N246 THRU 3N252
FIG.1 - DERATING CURVE OUTPUT RECTIFIED CURRENT PEAK FORWARD SURGE CURRENT, AMPERES BRIDGE OUTPUT FULL WAVE RECTIFIED CURRENT, AVERAGE AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT
1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 20
CAPACITIVE LOAD Ipk/IAV=5.0 Ipk/IAV=10 Ipk/IAV=20 (PER LEG) 60 Hz RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED WITH 0.47 x 0.47" (12 x 12mm) COPPER PADS
60 50 40 TA=25C 30 20 10
1.0 CYCLE TJ=150C
SINGLE SINE-WAVE (JEDEC Method)
0
40
60
80
100
120
140 150
1
10
NUMBER OF CYCLES AT 60 HZ
100
AMBIENT TEMPERATURE, C
FIG. 3 - TYPICAL FORWARD CHARACTERISTICS PER LEG
TJ=25C PULSE WIDTH=300s 1% DUTY CYCLE
FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG
10
INSTANTANEOUS FORWARD CURRENT, AMPERES
INSTANTANEOUS REVERSE CURRENT, MICROAMPERES
20
10
TJ=125C
1
TJ=100C
1
0.1
TJ=25C
0.1
0.01 0
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE, %
0.01
0.4
0.6
0.8
1.0
1.2
1.4
1.6
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG
100
JUNCTION CAPACITANCE, pF
TJ=25C f=1.0 MHz Vsig=50mVp-p
10
1 0.1
1
10
100
REVERSE VOLTAGE, VOLTS

▲Up To Search▲

Price & Availability of 3N250

	To Download 3N250 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .